John Deere Replacement Back Rest

Replaces AR65449

Black Seat made in USA
Fits all

4200 4300 4400 4500 4600 4700

John Deere tractors

over $ 200.00 at most dealers

This seat has lumbar support

slide tracks not included...
armrests and slide tracks optional

Mounting 11.25 wide by 11.5 inches

This seat will replace LVA10029

OK LOOK AT THIS SEAT.... WE GET NOTHING BUT COMPLIMENTS ON THIS SEAT. THE LUMBAR SUPPORT OF YOUR BACK IS THE KEY POINT....

THERE IS NO SEAT AT THIS PRICE THAT FORMS TO YOUR BACK.... ITS NOT JUST A STRAIGHT BACK YOU LEAN ON.... GO AHEAD LOOK AT THE PICTURES AGAIN YOU WILL SEE.... WE HAVE CHEAPER AND MORE EXPENSIVE SEATS BUT WE BRAG ABOUT THIS ONE .........READ ON THERES MORE,....

YOU ARE LOOKING AT THE NEW SPRAY SKIN TECHNOLOGY (SST) BUCKET SEAT.

Can fit many mowers and other equipment

Exmark – GEHL – Kubota – POLARIS – SCATTRAK – Scag – THOMAS – TORO - TOYOTA – VOLVO - YALE - CLARK

MOUNTING... THE SEAT HAS AN 11.25" SIDE TO SIDE X 11" FRONT TO BACK MOUNTING AND 4" MOVEMENT SINGLE LOCKING SLIDE TRACKS.

OVERALL WIDTH IS 18.50 AND OVERALL HIGHT IS 20.25. THERE IS A DRAIN HOLE IN THE SEAT FOR WATER TO RUN OUT. THIS SEAT HAS MANY BENEFITS. BETTER THAN VINYL OR RUBBER. MANY OTHER SEATS AND SUSPENSIONS ARE ALSO AVAILABLE, JUST ASK.

• COMFORTABLE WITH FIXED LUMBAR SUPPORT
• Mounting 11.25" wide by 11" front to back *NOTE WITH 2.75 INCH SUSPENSION, MOUNTING CAN BE 9.5 WIDE BY 11 OR 10.65-11.25 (SLOTTED) BY 11 FOR A SMOOTHER RIDE ON YOUR EQUIPMENT
• MADE FROM SPRAY SKIN TECHNOLOGY (SST) URETHANE FOAM
• NO SEWN COVERS
• DURABLE: SST STRETCHES UP TO 500% COMPARED TO EITHER VINYL OR FOAM-IN-PLACE, WHICH STRETCHED 100-110%
• WILL NOT CRACK OR PEEL AWAY FROM FOAM
• VISUALLY APPEALING
• COMFORTABLE WITH FIXED LUMBAR SUPPORT
• WATERPROOF
• COST EFFECTIVE
• OPTIONS AVAILABLE PRESSURE SEAT SWITCH, SUSPENSIONS FROM 2.75 INCH TO 9 INCH IN HEIGHT AVAILABLE AIR OR MECHANICAL. SWIVEL

High Quality Seat

Taller than original seat

Made in USA

Has drain holes

Includes mounting brackets

No modifications needed

Fits all John Deere tractor models listed below....

Note that this seat is 1 inch thicker

650

750

850

950

1050

Original seat costs

over $ 190.00 at most dealers

JOHN DEERE PART NUMBERS

MG87019259 MG9601475 MG86591379

Seat switch is not included in this listing . Shown for identification only.

IF your skidsteer uses 1 or 2 switches be sure it is the switch shown. If you need switches contact us.

FITS ...

8875 7775 6675 5575 4475 675B 675

MOUNTING... THE SEAT MOUNTING HAS AN 11.25" SIDE TO SIDE X 11.5" FRONT TO BACK MOUNTING ...CHECK YOUR MOUNTING

THERE IS A DRAIN HOLE IN THE SEAT FOR WATER TO RUN OUT.

* * THIS LISTING IS A Yellow SEAT * *

Fits

F620 Gas Z-Trak

F680 Gas Z-Trak

F687 Z-Trak

717A & 727A Mini Frame Z-Trak

( standard seat )

737 & 757 Mid Mount Z-Trak

( standard seat )

Replaces

AM128146

TCA17404

Read before you buy !!

Customers requested a high quality seat

11.25 by 11.5 inch mounting without slides

** THE FLAT RATE SHIPPING COST FOR 48 STATES ONLY
**for Alaska and Hawaii AND ALL OTHER COUNTRIES ASK FOR FREIGHT QUOTE BEFORE BUYING MAY NOT BE ABLE TO SHIP TO SOME COUNTRIES.

Flat Rate SHIPPING TO THE 48 STATES. WE WILL SHIP UPS

THESE SEATS ARE WONDERFUL. THE SST SEAT IS PERFECT FOR FORKLIFTS AND MANY TRACTORS, FARM EQUIPMENT, HARVEST EQUIPMENT, CONSTRUCTION EQUIPMENT SKID STEERS BOBCAT

CASE - NEW HOLLAND - JOHN DEERE CATAPILLAR – DAEWOO – DITCHWITCH – GEHL – HYDRA-MAC – HYUNDAI - ICC – JCB - KANGA – KOEHRING – KOMATSU – KUBOTA - MAHATO – MUSTANG – NEWHOLLAND – OMNIQUIP – POLARIS – SCATTRAK – TAKEUCHI – THOMAS – TORO - TOYOTA – VOLVO - YALE - CLARK

JOHN DEERE PART NUMBERS

MG87019259 MG9601475 MG86591379

Seat switch is not included in this listing . Shown for identification only.

IF your skidsteer uses 1 or 2 switches be sure it is the switch shown. If you need switches contact us.

FITS ...

8875 7775 6675 5575 4475 675B 675

AND OTHERS

BOBCAT PART NUMBERS 6563140, 6669135

Bobcat Models

A220 T190 463
520 530 540 542 543 542B 543B
620 630 631 632 641 642 643 642B
700 720 731 732 741 742 743 743DS
825 843 863

970 974 975

Case backhoes ... replaces part # B94115 B94116

MOUNTING... THE SEAT MOUNTING HAS AN 11.25" SIDE TO SIDE X 11.5" FRONT TO BACK MOUNTING ...CHECK YOUR MOUNTING

THERE IS A DRAIN HOLE IN THE SEAT FOR WATER TO RUN OUT.

• COMFORTABLE WITH FIXED LUMBAR SUPPORT
• Mounting 11.25" wide by 11.5" front to back
• NO SEWN COVERS
• OPTIONS AVAILABLE FOLD UP ARMS. PRESSURE SEAT SWITCH, SUSPENSIONS FROM 2.75 INCH TO 9 INCH IN HEIGHT AVAILABLE AIR OR MECHANICAL. SWIVEL

John Deere Replacement 2-Piece Seat AR65449 & AR65448